At a glance
| Booth | K2786 |
| Country | TW |
| Website | www.nivek.com.tw/about.php |
Company profile
Nivek International Co., LTD. specializes in photoelectric panel carriers, semiconductor metal consumables, and the development, design, and production of precision metal components for electronic equipment. Its semiconductor capability includes semiconductor metal precision-parts manufacturing. Nivek International Co., LTD. is a precision manufacturer established in 2007 in Kaohsiung, Taiwan, with precision-parts processing serving automation, optoelectronics, and semiconductor applications. This scope positions Nivek International Co., LTD. around precision metal components, carriers, and consumables used by electronic, optoelectronic, and semiconductor equipment applications.
Exhibits
The DMG MORI NTX 1000 five-axis turn-mill center lists a maximum turning diameter of 430mm, a maximum turning length of 800mm, and a built-in electric spindle with C axis at (0.0001°) 6,000rpm. For complex five-axis machining, the same equipment lists a B-axis swing range of ±120°, swing speed of 100rpm, a lower turret that can synchronize with the upper tool spindle, and a BMT turret with up to 10 driven-tool stations at 10,000rpm. The SPEEDFAM 36GPAW-TD single-side polishing machine has a 914mm polishing-plate diameter, four 0.4KW pressure heads, and listed wafer flatness below 0.2µm. The KYP-900 pneumatic flat-finishing machine lists a 916 mm plate outside diameter, maximum workpiece diameter of 342 mm (368mm), minimum workpiece thickness of 0.3 mm, surface accuracy of 0.2-0.5u, plate speed of 10-60 R.P.M., four machining axes, and maximum processing pressure of 80kg per axis. A standard KYP-900 flat-finishing configuration is also listed with the same 916 mm plate outside diameter, 342 mm (368mm) maximum workpiece diameter, 0.3 mm minimum workpiece thickness, 0.2-0.5u surface accuracy, and 10-60 R.P.M. plate speed. The LHKM-FB-W20 fiber laser marking machine provides 100×100／200×200 mm marking fields, 10μm minimum line width, 0.15mm minimum character size, 7000 mm/s marking speed, 1mm marking depth, ±0.002mm repeatability, and a German IPG laser source. The LP-3025 large gantry machining center lists X, Y, and Z travels of 3,000 mm, 2,500 mm, and 760 mm, a 3,020 x 2,400 mm table, maximum table load of 12,000 kg, and JIS6338 repeatability of ±0.003 mm. For the LP-3025, listed rapid-feed rates are 20000 mm / min on X and 15,000 mm / min on Y and Z, cutting feed is 1 ~ 10,000mm /min, positioning accuracy is ±0.015 / full length mm, and vertical-horizontal head exchange time is 8 seconds. The NXV-1020A vertical machining center lists a 12,000 rpm spindle, maximum spindle-motor power of 18.5 Kw, travels of 1,020mm, 520mm, and 540mm on X, Y, and Z, and maximum average table load of 500Kg. The A+1600 vertical machining center lists X, Y, and Z travels of 1,600 mm, 800 mm, and 800 mm, a 1,700 x 800 mm table, maximum table load of 2,000 kg, cutting feed of 1 ~ 8,000 mm / min, and JIS6338 repeatability of ±0.003 mm. The VturnⅡ-20 CNC lathe lists a 590mm swing over bed, maximum turning diameter of 440mm, X travel of 220+20mm, Z travel of 510mm, and maximum spindle speed of 4200rpm. The VMP-30A and VMP-40A vertical machining centers both list 10,000rpm spindles; VMP-30A has travels of 760mm, 420mm, and 510mm, while VMP-40A has travels of 1,020mm, 520mm, and 505mm. The CincomL20E IX sliding-head turn-mill CNC lathe lists a maximum machining diameter of ø20mm, front drilling diameter of ø10mm, spindle through-hole diameter of ø26mm, main-spindle speed up to 10,000min-1, and back-spindle speed up to 8,000min-1. The START SB -20J type E sliding-head turn-mill CNC lathe also lists a maximum machining diameter of ø20mm, main-head travel of 205mm, maximum drilling diameter of ø10mm, four side-milling rotary-tool axes, rotary-tool speed up to 8,000 revolutions per minute, and main-spindle speed up to 10,000 min. Inspection resources include an automatic three-dimensional coordinate measuring device with an 800*1000*600mm measuring envelope, E(um) accuracy of 3.0+L/300, and R(um) repeatability of 3.5um. Additional inspection equipment includes a one-dimensional electronic height gauge, a high-magnification digital microscope with 1.3-megapixel Color CMOS imaging and 200× magnification, a two-dimensional precision image measuring instrument, and a surface roughness measuring instrument. The two-dimensional image measuring instrument lists a 200*100*200mm measuring travel, X/Y accuracy of 2.0+L/200 μm, X.Y.Z repeatability of 2μm, and an 18-360X 6.5:1 stepless optical lens. The surface roughness measuring instrument lists a 50mm X-axis range, 800μm Y-axis range, five measuring speeds of 0.15, 0.3, 0.6, 1.5, and 3min/s, and straightness accuracy of 0.3μm/50mm.
Capabilities and products
- photoelectric panel carriers
- semiconductor metal consumables
- development, design and production of electronic precision metal components
- semiconductor metal precision parts manufacturing
- five-axis turn-mill precision machining
- single-side precision polishing
- fiber laser marking
- large gantry machining
- vertical machining-center processing
- sliding-head turn-mill CNC machining
- 3D coordinate measurement
- 2D precision image measurement
- surface roughness measurement