At a glance
| Booth | R7500 |
| Country | TW |
| Website | www.vero.com.tw |
Company profile
Vero Veria Corporation was established in 1980 and began manufacturing, supplying and installing aluminum raised-floor systems for semiconductor clean rooms in 1988. The company owns more than 20 die-casting machines in the 2000-to-3000-ton range. Its clean-room product range includes aluminum raised floors, ceiling grids, partitions and tool foundations, forming a structural product set for semiconductor clean-room applications. Vero Veria Corporation's manufacturing, supply and installation activities therefore cover both raised-floor infrastructure and additional clean-room structural elements used around production equipment and controlled environments.
Exhibits
Since 1988, Vero Veria Corporation has manufactured, supplied and installed aluminum and magnesium alloy raised floors, partition panels, ceilings and seismic steel structures for semiconductor clean-room factories. The company states that it has completed more than 5000 raised-floor projects, with applications including computer rooms, offices, IC test areas, clean rooms and photomask laboratories. Its listed clean-room and structural product areas include integrated clean-room products, aluminum and magnesium alloy die-casting applications, clean-room ceiling and partition systems, steel structure systems, vibration-resistant equipment structures, modular steel raised-floor systems and tool foundations. The raised-floor product introduction identifies blind panels V60AS, honeycomb panels V60AP, grating panels V60AG and window panels V60AW, and lists a nominal panel size of 600 mm with multiple thickness and load configurations. For the V60AS and V60AP series, the listed model range runs from V60AS300 and AP300 through 500, 600, 700, 1000, 1200, 1500, 1700, 2000, 2500 and 3000 classes, with corresponding center-point concentrated-load and ultimate-load values given for each class. For grating panels, V60AG 500, 700, 1000 and 1200 are listed with center-point concentrated loads of 500, 700, 1000 and 1200 kgf respectively, while their ultimate loads are listed as at least 1000, 1500, 2000 and 2400 kgf. V60AW 500 is listed as a window-panel model with a 500 kgf center-point concentrated load and an ultimate load of at least 1000 kgf, while the product notes describe grating panels for return-air use and window panels for maintenance use. Available surface treatments and panel finishes include PVC panels, EPOXY coating, Ni-Cr plating, stainless-steel surface tiles and HPL surface tiles, with conductivity values listed for the different finishes. The dimensional specification lists 600(+0.00/-0.20) mm panel size, 55(60)±0.1 mm thickness, four-edge flatness below ±0.2 mm and diagonal tolerance below 0.5 mm. For V60AP panels, listed opening ratios include 17%, 20% and 30% with PVC, 19%, 22% and 30% with EPOXY coating or Ni-Cr plating, 10% and 17% with SUS stainless steel, and 17% with HPL; V60AG lists 50% and 60% for the 500 class and 50% for the 700-to-1200 classes. Independent support pedestals are specified across floor-height ranges of 100 to 400 mm, 400 to 800 mm and 800 to 1500 mm, with corresponding tube diameters, base sizes and base thickness options for different installation heights. Pedestal tubes and bases are listed with EPOXY coating, while the fixed metal at the top of the pedestal frame is plated. Vero Veria Corporation states that the related products can be changed from the original design to match actual customer requirements, with its research-and-development and design teams providing made-to-order products for specific needs. The broader manufacturing and testing scope also lists QUALIFY-5, seismic-center shaking-table simulation tests, floor testing, simulated dynamic analysis, die-casting equipment, machining, mold fabrication and maintenance, and finished-product inspection.
Capabilities and products
- semiconductor cleanroom Al/Mg raised-floor manufacturing and installation
- cleanroom partition and ceiling systems
- cleanroom seismic steel structures
- modular steel raised floors
- vibration-resistant equipment structures
- 2000~3000-ton aluminum/magnesium die casting
- machining
- mold fabrication and maintenance
- shaking-table seismic simulation testing
- raised-floor testing
- cleanroom tool foundations
- raised-floor dynamic simulation analysis