At a glance
| Booth | I2304 |
| Country | TW |
| Website | www.tes.com.tw |
Company profile
TES ELECTRICAL ELECTRONIC CORP. was founded in 1988 as a professional manufacturer of measurement instruments and hand-held equipment, and the company states that it has thirty-five years of experience in test instruments. After building design know-how in its first two years, TES shifted its product focus toward higher-end digital testers and adopted SMT equipment and fully automatic assembly lines as part of its manufacturing approach. As personal computers became more widely used, TES added data-recording and computer-linking capability to several higher-end products and expanded its portfolio into environmental monitoring and medical instruments. TES states that it now has more than 100 employees and an R&D team that develops and designs new products and customized products according to required specifications. Its company profile lists electrical measurement, environmental protection, medical, electric-vehicle instrumentation, semiconductor-fab measurement, solar, wind-power, ESG energy-saving and carbon-reduction instrumentation among the areas it serves. The company has established a TAF-accredited laboratory that provides TAF-accredited test reports for relevant products, and it states that its products are adopted by major listed companies in Taiwan and marketed worldwide. TES reports an export-to-domestic sales ratio of 80% to 20%, supporting a business model in which a large share of its measurement products is supplied outside Taiwan. Its product categories include particle and air-quality instruments, odor detectors, turbidity and water-quality analyzers, refractometers, coating-thickness testers, vibration meters, anemometers, solar testers, ground-resistance testers, sound meters, illuminance meters, temperature and humidity instruments, electrical meters, power-quality analyzers, battery analyzers, calibrators, and network-cable testers.
Exhibits
For cleanroom environmental testing, TES lists the NEBB cleanroom specification as covering particle measurement, air velocity and volume, filter leakage, cleanliness, temperature and humidity, parallelism, recovery rate, particle settling, and illuminance, and it provides a series of instruments for these parameters. For cleanliness checks against ISO class 14644-1 1999, the application page lists TES-5110 for measuring whether dust-particle counts meet requirements. For airflow verification, TES-1341N is listed for confirming whether FFU and RCU air delivery is normal, while TES-1364 and TES-1365 are listed for indoor temperature and humidity measurements with continuous recording over a 20-hour period. For illuminance, TES-1339R is used to check whether indoor brightness meets requirements after lights have been on for 100 hours, with measurement at 76 cm above the floor; TES-52AA is listed for maximum sound-pressure measurement from 63 Hz to 8 kHz. TES-96 is a coating-thickness tester for automatically distinguishing magnetic and non-magnetic metal substrates and measuring non-magnetic coatings on magnetic metals or insulating coatings on non-magnetic metals. TES-96 covers 0 to 1400 μm or 0 to 55.0 mils, with accuracy listed as ±1 μm below 50 μm, ±2.5% from 50 μm to below 1000 μm, and ±3% above 1000 μm and below 1400 μm. Its resolution is 0.1 μm below 100 μm and 1 μm at 100 μm and above, with storage for 99 single readings and ten groups of 100 readings each. TES-96 provides upper- and lower-limit audible and display alarms, average, maximum, minimum and standard-deviation functions, selectable μm or mils units, a backlit LCD, and automatic power-off. The tester uses two 1.5 V AAA alkaline batteries, lists about 26 hours of battery life with the backlight off, operates from 0 °C to 40 °C, stores from -20 °C to 50 °C, and measures 114 x 53 x 31 mm at about 102 g. Its supplied accessories include iron and aluminum zero-calibration plates, calibration foils of approximately 50, 100, and 1000 μm, alkaline batteries, a carrying case, a protective cover, and an instruction manual.
Capabilities and products
- dust and air-quality detectors
- odor detectors
- solar-energy test instruments
- ground resistance meters
- air velocity, airflow, wind direction and air-pressure meters
- temperature, humidity and atmospheric-pressure meters
- turbidity and water-quality analyzers
- vibration meters
- coating thickness testers
- illuminance meters
- sound level meters
- carbon monoxide and carbon dioxide testers
- magnetic-field and electromagnetic-wave testers
- power quality analyzers
- network cable testers