At a glance
| Booth | J3246 |
| Country | TW |
| Website | www.newjr.com.tw |
Company profile
Established in Taiwan in 1997, New J.R. Electronic Co., Ltd. provides total power and energy saving solutions for customers that require power products, application support and reliability in their systems. The company applies Advanced Energy (AE) / Artesyn power modules and digital programmable AC/DC power supplies to meet customer requirements and reliability needs, combining power products with application knowledge, experience and expertise. Its stated product and service coverage includes communications, industrial, computing, data storage and healthcase applications, modified standards and value-add service, low-energy-consumption ECO friendly products, and space-efficient, high-density products. New J.R. Electronic Co., Ltd. is an authorized distributor of Artesyn (Advanced Energy) in Taiwan and describes itself as a technical team dedicated to intelligent power solutions rather than only a supplier of individual power products. Its engineering approach extends into system-level design thinking so that a power supply can deliver efficiency and reliability in the customer's actual application, with support continuing through selection, design-in and mass production. Service locations in Taiwan, Hong Kong and Shenzhen support customer research and development and production needs across the region, with the Taiwan location identified as the Taoyuan headquarters. The company lists communications, industrial, computing, networking and medical equipment among its application areas, and its company information also lists communications, computing, medical, industrial automation and specialized military equipment. Customization is part of its service model: special specifications and modifications are accepted and can be aligned with a customer's development schedule, while experienced engineers support the path from product selection to mass production. The full product range is described as compliant with RoHS and international safety standards, and the company also emphasizes compact, high-power-density designs intended to save system space. Partner brands listed by the company are Artesyn, Advanced Energy, Excelsys, UltraVolt, HiTek, SL Power and Tegam, reflecting the range of power technologies it distributes and supports. New J.R. Electronic Co., Ltd. states a commitment to the Responsible Business Alliance Code of Conduct across daily operations and its global supply chain, covering safe working conditions, dignity and respect for workers, environmental responsibility and ethical business conduct. Its RBA commitments include zero tolerance for forced labor and child labor, respect for a diverse workforce, an equal and inclusive workplace, lawful and fair wages and benefits, systematic elimination of occupational hazards and robust emergency preparedness. The same commitments include lower carbon and waste in processes, keeping resources in circulation, strict control of emissions, zero corruption and bribery, protection of data privacy and intellectual property, and competition based on integrity and fairness. The company also describes compliance review mechanisms, supply-chain management, regular audits and assessments, and use of the PDCA cycle for continual improvement as elements of its management system. Its business is summarized as distribution of high-efficiency intelligent power supplies together with power technical support services, bringing product selection, modification and value-added assistance into a broader power and energy-saving solution offering.
Exhibits
As server processors and associated memory devices require more power, New J.R. Electronic Co., Ltd. presents power-conversion approaches that consider conversion at the system and server levels, including migration toward 48 V systems with distributed power conversion or direct power conversion inside servers. Advanced Energy's Artesyn ADC100M-04 is a direct-conversion PSA host in that 48 V context, and the ADC100 series follows the Power Stamp Alliance standard product footprint and functions to provide a modular onboard solution for converting 48 Vin / 54 Vin to low-voltage, high-current applications. The ADH1300 half-brick isolated DC-DC converter provides a single regulated 28 V/46.5 A low-noise 1300 W output, reaches up to 95% efficiency at half load and accepts a 36 to 75 VDC input range for standard 48 V telecom equipment such as remote radio head applications. ADH1300 uses a fixed 300 kHz switching frequency to reduce external EMI filter requirements, an open-frame design with an aluminum thermal baseplate optimized for conduction or forced-air cooling, and operation from -40 to +85°C ambient with full-power delivery up to a 100°C baseplate temperature. The ADH1300 follows a standard 1/2-brick footprint of 2.3 inches (57.9 mm) by 2.4 inches (61 mm) and has an installed height of 0.5 inches (12.7 mm), supporting compact board-spacing requirements. The ADH700 half-brick isolated DC-DC series provides a single regulated 28 V/25 A or 50 V/14 A low-noise 700 W output at greater than 95% efficiency at half load, with a 36 to 75 VDC input range for standard 48 V telecom equipment including RRH applications. ADH700 switches at a fixed 280 kHz to minimize external EMI filtering, uses an open frame with an aluminum thermal baseplate for conduction or forced-air cooling, operates from -40 to +85°C ambient with full power up to a 100°C baseplate temperature, and has a 0.5-inch (12.7 mm) installed height. The 300 W ADO300 eighth-brick isolated DC-DC series is designed for standard 48 V power in computing and server applications and regulated 48 V power in communications equipment, and it provides a single fully regulated 3.3, 5 or 12 VDC output with up to 95.2% full-load efficiency, a 36 to 75 VDC input range and no minimum-load requirement. The ADO300 product page further lists 300 W continuous power, RoHS 6 compliance, UL94 V0 material standard, 95% efficiency at 60% load, output-current entries of 26 A at 12 V and 60 A at both 3.3 V and 5 V, 1500 Vdc isolation, and a 1/8 Brick DOSA Compatible mechanical form factor. ADO300 is offered with digital and analog interface options in the industry-standard DOSA footprint so customers can address control, monitoring and flexibility requirements in distributed-power designs. The ADO500 and ADO550 series are described with 96.5% full-load efficiency and a -20 to +85°C ambient operating range for isolated conversion in distributed power architectures that feed non-isolated converters in computing and communications equipment. Their eighth-brick isolated converters provide a fully regulated 10 V, 500/550 W output from a 45 to 56 V input range with no minimum load, support enhanced pre-bias startup and parallel operation of two converters using automatic droop current sharing, and switch at 185 kHz to reduce EMI filtering needs. The ADQ600 quarter-brick isolated DC-DC series provides a fully regulated 12 V output rated at 600 W with up to 50 A output current, no minimum load and a 40 to 60 V input range for 48 V power in computing, server and telecom equipment. ADQ600 is listed with 95.6% typical full-load efficiency, -40 to 85°C ambient operation, a 3.8mm pin-length option, RoHS 6 compliance, a 12V, 50A output version and a 10V, 63A version, 600W output power and 1500Vdc isolation. Its mechanical format is a 1/4 brick with an industry-standard quarter-brick pinout, and listed protection functions are output overcurrent protection, output overvoltage protection, overtemperature protection and input undervoltage lockout. The ADQ600B series extends the quarter-brick 600 W concept to a 36 to 75 V input range, a fully regulated 12 V output at up to 50 A with no minimum load, typical 95.5% full-load efficiency and -40 to 85°C operation. ADQ600B also provides digital and analog interface monitoring for voltage, current and temperature settings, adding monitoring functions to distributed power architectures that supply non-isolated converters. The 700 W ADQ700 quarter-brick isolated DC-DC series is designed for 48 V power in computing, server and communications equipment, providing regulated 12 VDC at up to 58 A from a 40 to 60 VDC input range with 96% typical full-load efficiency. ADQ700 switches at 200 kHz, operates from -40 to +85°C, includes pre-bias startup, parallel capability with automatic droop current sharing, input undervoltage and overvoltage lockout, output overvoltage and overcurrent protection and overtemperature protection. Analog and digital interface options are available for ADQ700 together with open-frame and baseplate models whose installed heights are respectively 0.43 inches (11 mm) and 0.52 inches (13.3 mm). The Artesyn iLS600 series is a 600 W benchtop programmable DC power supply with a single output, embedded 12-bit D/A and A/D converters for accurate voltage and current reporting, digital rotary voltage and current control, remote control through USB, Ethernet and analog-control inputs, and LXI certification. The iLS600-R product page lists five models reaching up to 400V and 33A, a 600W extended power range, a compact high-density 1U package, 100 – 240 Vac input, one output, 600 W total power, a 30 – 400 V output-voltage range and a 2.5 – 33 A output-current range. For iLS600-R, the listed constant-voltage figures are 20 – 150 mV RMS and 60 – 200 mV P-P, the 10-90% load-regulation entries are 15 – 200 mV for voltage and 15 mV for current, and the 180-260 VAC line-regulation entries are 15 – 200 mV for voltage and 15 mV for current. The iLS600-R page also lists a weight of 6 lb (2.7 kg), giving the programmable laboratory supply a defined benchtop form factor in addition to its remote-control interfaces and single-output electrical range. For high-voltage conversion, the UltraVolt High Power C series is listed as a 250W, 24V DC-input, 125V - 60kV DC single-output high-power DC-DC converter with positive or negative polarity. High Power C configurations include 1/8C to 6C at 4.5"x8"x1.1" for 125V - 6kV output, 8C to 30C at 4.5"x9.25"x2" for 8kV - 30kV output, and 40C to 60C at 4.5"x14"x2.5" for 40kV - 60kV output, all with 250W and 24V DC input. The same high-voltage product family lists a Dual Polarity C series with 250W, 24V DC input and 125V - 6kV positive-and-negative output, an A series with a 2"x4.75"x1" form factor, 30W, 12V - 24V DC input and 62V - 60kV single output, and an AA series with a 1.5"x3"x0.75" form factor. A related UltraVolt C series is identified as PCB-mount high-voltage DC-DC power modules with 30 W and 24 V DC input, adding a board-mount high-voltage option to the listed power-conversion portfolio.
Capabilities and products
- server PSA direct-conversion power module supply (Artesyn)
- half-brick isolated DC-DC converter supply (Artesyn)
- eighth-brick isolated DC-DC converter supply (Artesyn)
- quarter-brick isolated DC-DC converter supply (Artesyn)
- benchtop programmable DC power supply distribution (Artesyn)
- high-voltage DC-DC power module supply (UltraVolt)
- bipolar high-voltage power supply distribution (UltraVolt)
- digital programmable AC/DC power supply distribution
- intelligent power supply distribution and technical support
- power supply specification customization and modification
- power supply selection and design-in support
- process test instrument supply