At a glance
| Booth | S8243 |
| Country | TW |
| Website | www.bojiang.com.tw |
Company profile
Bo-Jiang Technology Co., Ltd. specializes in the design and manufacture of high-precision RF/microwave coaxial connectors and mmWave components for test and measurement. To meet strict requirements, Bo-Jiang Technology Co., Ltd. continually invests in updated high-precision CNC machines and has upgraded verification facilities including a network analyzer up to 110GHz to support development of higher-frequency series. Its experienced design team verifies product performance with relevant software, while engineers maintain and share a know-how database under the FEMA system. The company provides technical suggestions and Joint Design Manufacturing services, bringing human resources, facilities, and know-how into projects from the design stage to shorten customer development time and reduce resource waste. Mechanical and environmental verification measurements are used to ensure products meet performance requirements. Bo-Jiang Technology Co., Ltd. holds various quality certifications and design patents, and its product information lists ISO 9001, ISO 14001 and IECQ QC 080000 certifications as well as installation of ISO/IATF16949 systems. Its product information also describes more than 26 years of design, manufacturing and assembly experience in RF/Microwave coaxial connectors and cable assemblies. Bo-Jiang Technology Co., Ltd. is located in Taiwan.
Exhibits
For test and measurement applications, Bo-Jiang Technology Co., Ltd. supplies RF/Microwave coaxial connectors and stability cables for RF cable assemblies, including SMA, 3.5mm, 2.92mm, 2.4mm, 1.85mm, 1.35mm and 1.0mm precision connectors for different operating environments. High-stability cable assemblies using precision RF connectors cover frequencies from 26.5 GHz to 110 GHz and are used in measurement equipment and high-speed signal transmission applications including semiconductor inspection, vector network analyzers, 5G mobile communication systems and millimeter-wave applications. For connector types 1.0mm, 1.85mm, 2.4mm, 2.92mm, 3.5mm, SMA and N, the test-cable specifications list a nominal impedance of 50±1 Ω and maximum frequencies of 110, 67, 50, 40, 26.5, 26.5 and 18 GHz respectively. For the same connector order, general-type overall diameters are N/A, 2.7, 3.3, 4.1, 5.3, 5.3 and 5.3 mm, while Flexible Type (HS) and Universal Type (HF) diameters are 4.2, 7.1, 7.1, 7.1, 8.3, 8.3 and 8.3 mm. Typical VSWR values are 1.3, 1.3, 1.2, 1.2, 1.2, 1.2 and 1.2, with maximum values of 1.4, 1.4, 1.3, 1.3, 1.3, 1.3 and 1.3. The cable specifications list typical amplitude-stability values of ±0.1, ±0.1 and five entries of ±0.05 dB, maximum amplitude-stability values of ±0.25 and five entries of ±0.1 dB, typical phase-stability values of ±2, ±10, ±8, ±4, ±4, ±4 and ±4 degrees, and maximum phase-stability values of ±15, ±11.5 and four entries of ±8 degrees. General-type insertion-loss values are 15, 5.9, 3.3, 2.4, 1.7, 1.7 and 1.7 dB/M; nominal time-delay values are 4.28, 4.28, 4.28, 4.28, 4.33, 4.33 and 4.33 ns/M; and typical velocity-of-propagation values are 78, 78, 78, 78, 77, 77 and 77 percent. General-type minimum bend radii are 10, 15, 20, 20, 25, 25 and 25 mm, while Flexible Type (HS) and Universal Type (HF) values are 15, 25, 25, 25, 40, 40 and 40 mm, and the general-type temperature range is -55 to 125°C. The product range includes Multi Coax connectors and cable assemblies; 1.0mm, 1.85mm, 2.4mm, 2.92mm, 3.5mm and SMA End Launch connectors; high-performance test cable assemblies and phase-match cable; solderless PCB connectors; 12G SDI cables and 75 Ohm 12GHz(18GHz) adaptors; and 3.5mm, 2.92mm, 2.4mm and 1.85mm NMD cable assemblies. High-frequency product families include a 0.8mm D Band connector series; 1.0mm W Band adaptors, Sparkplug and End Launch connectors; 1.35mm E Band adaptors; and 1.85mm, 2.4mm, 2.92mm and 3.5mm connector series with panel-receptacle, adaptor and End Launch variants. Additional RF product families include High Performance RF Adaptors, Waveguide to Coaxial Adaptors, SMP and SMPM soldering, PCB-mounting and surface-mount connectors and adaptors, an SMPS adaptor, BNC, MINI BNC and Micro BNC families, SMA and Reverse Polarity SMA families, N type, F type, TRB, RF adaptor, MMCX, UHF, TNC, FME, MCX, 1.6/5.6, Reverse Polarity TNC, 1.0/2.3, PAL, MINI UHF, FAKRA, SMC, BT43, RCA, SSMB, Reverse Polarity BNC, SSMA, 7/16, BMA and SMB families. The range also lists RF Cable Terminator, RF Coaxial Accessories, RF/Microwave Coaxial Probe, 4.1/9.5 Connector Series, RF Connector Torque Wrenches, DC BLOCK, plug-to-plug, jack-to-jack, jack-to-plug and T-shaped, Y-shaped and U-link RF coaxial adaptors, connectors for audio and video systems, high-frequency end launches, SMA directional couplers, and Optical Communication products. The 5G Solution range lists 1.0mm, 1.85mm, 2.4mm, 2.92mm and 3.5mm connector series, solderless PCB connectors, high-performance test cable assemblies, high-performance phase-match cable, High Performance RF Adaptors and Waveguide to Coaxial Adaptors, supporting applications from 18GHz to 110GHz. The 1.0 mm W Band RF/Microwave coaxial connector series is designed for 50 Ohms and operation up to 110 GHz, with a 1.0 mm outer-conductor ID, an air-dielectric interface and a contact supported by a short dielectric bead. The 1.0 mm W Band series supports semi-rigid and low-loss flexible cable and custom adaptor applications, with cable assemblies described as having low insertion loss, low reflection loss and good VSWR, as well as extreme high-frequency transmission, electrical performance, durability and reliability. Electrical specifications for the 1.0 mm series are 50 ohm impedance, 0 to 110 GHz frequency range, 150 VRMS maximum working voltage, 500 VRMS minimum dielectric-withstanding voltage, 0.07 x √F(GHz) dB maximum insertion loss, 1.5 maximum VSWR, 4 Milliohms maximum center-contact resistance and 1 Milliohm maximum outer-contact resistance. Materials for the 1.0 mm series include passivated stainless steel or beryllium copper with Gold 50 micro-inches for body and metal parts, beryllium copper with Gold 50 micro-inches for the center contact, and Rexolite, Ultem 1000 or PCTEE for the insulator. Mechanical and environmental specifications list recommended coupling torque of 0.3 Nm to 0.41 Nm, proof torque of 0.7 Nm, durability of at least 500 mating cycles and a temperature range of -55°C through 125°C. Named 1.0mm products include the 1017LS502GQ001B PLUG End Launch connector, 1067LS502GQ001B JACK End Launch connector, 1069AS502SE001B W Band RF/Microwave Coaxial JACK SPARKPLUG Type connector, 1069ES502SQ001B W Band PLUG flange-mount receptacle with 2 holes accepting a φ0.3mm pin, and 1078NS500GQ001B JACK TO JACK ADAPTOR. Flexible Type (HS) and Universal Type (HF) armored-cable specifications can differ according to requirements and are subject to the actual specification. The BNC family includes crimp, clamp, solder, PCB, flange, receptacle and twisting-on connectors, accessories and adaptors; MINI BNC includes crimp and PCB-mount connectors and adaptors; and Micro BNC includes crimp and solder connectors and adaptors. The SMA family includes crimp, clamp, solder, PCB, receptacle and End Launch connectors, accessories and adaptors; Reverse Polarity SMA includes crimp, PCB, receptacle and Edge Launch connectors and adaptors; and N type includes crimp, clamp, solder, PCB and receptacle connectors, a surge arrester, accessories and adaptors. The F type family includes crimp, solder, twisting-on, PCB, receptacle and Edge Launch connectors, accessories and adaptors; TRB includes clamp and flange connectors and adaptors; and the RF Adaptor Series includes plug-to-plug, jack-to-jack, jack-to-plug, T-shaped, Y-shaped and U-link RF coaxial adaptors. MMCX includes clamp, solder, surface-mount and PCB-mount connectors, accessories and adaptors; UHF includes crimp, solder, twist-on, clamp and flange connectors and adaptors; and TNC includes crimp, clamp, solder, twist-on, PCB-mount and receptacle connectors, accessories and adaptors. FME includes crimp, PCB-mount and flange connectors and adaptors; MCX includes crimp, solder, PCB-mount, surface-mount, flange and End Launch connectors and adaptors; 1.6/5.6 includes crimp, clamp, flange and PCB-mount connectors and adaptors; and Reverse Polarity TNC includes crimp, PCB-mount and flange connectors. The 1.0/2.3 family includes crimp and PCB-mount connectors and adaptors; PAL includes crimp, twist-on, PCB-mount and receptacle connectors and adaptors; MINI UHF includes crimp and PCB-mount connectors and adaptors; and FAKRA includes crimp and PCB-mount types. SMC includes crimp, solder, PCB-mount, flange and Edge Launch connectors; BT43 includes crimp and PCB-mount connectors and adaptors; RCA includes crimp connectors and adaptors; and SSMB includes solder, crimp and PCB-mount connectors. Reverse Polarity BNC includes crimp, clamp, PCB-mount and flange connectors; SSMA includes solder, flange and PCB-mount connectors; 7/16 includes crimp, flange and clamp connectors; BMA includes solder, crimp and PCB-mount connectors; and SMB includes crimp, solder, PCB-mount, surface-mount, receptacle and End Launch connectors, accessories and adaptors. The 1017LS502GQ001B and 1067LS502GQ001B are respectively male and female 1.0mm End Launch RF/Microwave connectors described with superior return loss and a narrow appearance; the 1069AS502SE001B sparkplug jack connector has a screw that can thread into the housing. Bo-Jiang Technology Co., Ltd. presents its test-and-measurement cable offering as an effective and economical solution and states that its 5G-related connector series, NMD cable assemblies, RF adaptors, multi-coax connectors and cable assemblies are designed to meet customer demands.
Capabilities and products
- high-precision RF/microwave coaxial connector design and manufacturing
- Joint Design Manufacturing services
- mechanical and environmental verification for RF components
- 26.5–110 GHz test-and-measurement cable assemblies
- 1.0mm W Band 110 GHz coaxial connectors
- high-performance phase-matched RF cables
- waveguide-to-coaxial adapters
- solderless PCB RF connectors